Install, create an animal, play and tune its clips, bind your own model and export to a game engine
Moveset Animals creates 21 animals in Blender 4.2 and newer: a gorilla with IK controls and wooden toy-style bodies for every animal, with 8 to 18 base animations each, 265 in total, transitions between gaits, sliders for each clip, binding of your own model and export to Unity, Unreal and Godot
Quick start
- Install the add-on: Edit > Preferences > Get Extensions > Install from Disk, choose
moveset_animals-*.zip
- Open the 3D Viewport, press N and open the Moveset Animals tab
- Choose an animal in Animal and press Create Animal. The animal appears at the 3D cursor with its animations
- Press Play on any clip in the list. The timeline is set to the clip
Some animals (wolf, cat, horse, quadruped, bird, shark) use Rigify's metarigs: enable the Rigify add-on in Preferences first
Clips
Every animal has its own list of clips. Loops (walk, idle, sleep) and one-shot clips (death, jump, attack) are marked with an icon. Transitions between gaits are listed under Transitions
- Turn left / turn right - a 90° turn on the spot
- Jump, Hit, Death, Lie down, Sleep - the game basics; most animals have them
- Show clips for each animal, such as Howl (wolf), Pounce (cat), Rear (horse), FireBreath and TakeOff (dragon), Box (kangaroo), Coil, Hiss and Strike (snake), Breach and Circle (shark), Bask and TailSwipe (crocodile, lizard), Glide and Land (dragon), Eat, Shake and Sniff (wolf, bear, hoofed animals), Hop (bird), Jump and Sleep (apes), Stretch and Groom (bat), Wave and Ink (octopus), Threat (spider)
Clip settings
When a clip plays, its settings appear under the list:
- Tempo - faster or slower
- Amount - how much the body, head and tail move around the pose
- Stride and Lift (walking and running clips) - step length and paw height
Press Apply to rebuild that clip and its transitions
The snake
Segments appears under Animal when the snake is chosen: how many vertebrae it gets, from 6 for a light game rig to 64 for a smooth body (20 by default). Set it before Create Animal. Every clip works with any count
The snake has 18 clips:
- Slither, SlitherFast, Creep - the crawls. The whole body slides along one track on the ground, every part passing where the head was, so nothing skids sideways. They have a real speed, and the export moves the root by exactly the distance the snake crawls
- Sidewind - lies across the way it goes, loops lift off and land ahead. Swim - the head up, the tail sculls wider
- TurnLeft, TurnRight - the head swings round first and the body follows, the snake turns about its middle
- Idle, Taste - the head up on a raised neck looking round; low over the ground, tasting the air
- Coil, Rattle, Sleep - two or three loops side by side; in Coil and Rattle the neck rises from the middle and the head looks ahead, in Rattle the tail tip stands up and buzzes
- Hiss - rears up tall like a cobra over a loose coil. Strike - folds the front into a tight S and lunges out of it
- Yawn, Swallow, Hit, Death
For the crawls the clip settings read Wave length and Wave width instead of Stride and Lift: longer waves crawl faster, wider ones slower, and the speed follows. Swim and Sidewind get no transitions from the crawl
Your own model
Before you start: your model must look to -Y (front view, numpad 1), stand on the floor and have its scale and rotation applied (Ctrl+A)
The pose your model stands in. Thirteen animals already stand the way a modeller would sculpt them (the wolf, cat, horse, cow, pig, bear, quadruped, crocodile, lizard, bird, bat, shark and snake): legs apart, wings spread, and your model should match the wooden body. Eight have a pose made for binding, because their own stance is awkward to model in:
- Gorilla, chimpanzee, orangutan: upright A-pose - arms 45 degrees out with a soft elbow, palms down, fingers straight and a little apart, thumb out, legs straight and apart, feet flat
- Kangaroo: upright on straight legs, arms out and a little forward, tail straight back to the floor
- Octopus: eight straight arms in an even star, sloping gently to the floor
- Spider: the four legs of each side spread evenly from front to back
- Dinosaur: tail straight back, head level, the small arms away from the chest
- Dragon: neck and tail straight, head level, front legs straight down, wings spread
For these the panel has Model stands:
- Model Pose (default): press Show Model Pose to see the pose on the wooden body and build or pose your model the same way. Bind computes the weights in this pose and then carries your model into the animal's own stance, so the clips work as they are. Your original model stays in the scene, hidden, as
<name>_original
- Like the wooden body: the model already stands as the wooden body does
- Select your model (mesh), then the animal (it must be active)
- Check Model looks for what usually breaks automatic weights: unapplied scale or rotation, doubled or loose vertices, holes, a model turned sideways. Lines with a red icon are worth fixing before you bind
- Fit to Model scales the animal to the model's size and sets it on the same spot
- Bind Model skins the model to the skeleton with automatic weights and hides the wooden body. Right after that the add-on plays a walk and the idle on your model and counts the edges that stretch too far, so a torn skin shows at once. Test Motion repeats it any time
- Reset to Rest Pose stops the clip and puts every bone back at rest. Bind and Fit do it for you
If the test finds tears, open Weight Paint around the joints it names (hips, shoulders) and clean the weights, or fix the model and bind again
If your model has other proportions, move the bones in Edit Mode and press Rebuild Animations
Your own skeleton
If your model already has its own bones and weights, the add-on can put the clips on that skeleton instead of binding the mesh again. Your mesh and its weights stay as they are
- Select your skeleton (any armature that the add-on did not make). The panel shows your skeleton
- Press Map Bones. The add-on suggests an animal that looks like your skeleton, lists the main bones of that animal and matches them with your bones by name (Mixamo, Rigify and the usual names work). Choose another animal if the suggestion is wrong and press Update Table
- Check the table: for every bone of the animal choose the bone of your skeleton that plays it, the field has a search. Leave a line empty to skip it (the bone then follows its parent). A bone of yours can be used once
- Skeleton rests says in which pose your skeleton stands at rest: in the Model Pose of the animal (see above) or like the wooden body. The clips are moved as turns from that pose, so it should be one of them
- Faces is the way your skeleton looks. Find it takes it from the head, and from -Y if there is none (the octopus, the spider): set it by hand if your skeleton looks another way
- Press Retarget Animations. The clips appear as actions on your skeleton, named
<your skeleton>_<clip>, and in a list in the panel. The map is kept on your skeleton, so Match Again is not needed the next time
Good to know: the turns of the bones are copied, so skeletons with other proportions move like the animal but the feet can slide a little. The way the hips travel is scaled by the height of your skeleton. Bones you did not map follow their parent
Export
Export for Engine writes the animal with its clips:
- Unity and Unreal: FBX
- Godot: GLB
Options:
- Root motion (on by default): walk and run clips move the root forward at the clip's speed; transitions speed up and slow down smoothly
- Main bones only: leaves out the fingers and toes. Use it for smaller files, if you do not need them
Next to the file a .animals.json lists every clip with its length, whether it loops and its speed
Notes
- Clips are made by the add-on, so they are re-created when you press Rebuild
- After an update of the add-on, the clips in your file update by themselves when you open it. A clip you edited by hand keeps your edits; the panel then says so and offers Update Edited Clips to take the new motion instead
- Animals made in Blender 4.2 and 5.2 work the same
- The wooden bodies are placeholders for judging poses. For a finished game, bind your own model
Questions: nomicrostudio@gmail.com